A picture of the basic Kart Chassis,
lots to do, I don't really know how this is going to
work out.
|
|
The engine was quite easy to remove
from the bike, I would be stuck without my engine
crane, what a blessing! In this picture I'm trying to work
out where everything is going to fit.
|
Although not pictured, this is where
I decided on how the engine mounting frame will be made.
|
|
The engine frame will side in between
two pieces of angle welded on to the kart chassis. The holes
that you can see in the picture are part of the actual engine
frame itself, these allow the engine frame to slide backward
and forward within the angle frame to enable adjustment
of the
chain.
|
