|
|
|
The Rolls Royce Viper 102 Turbojet
engine comes from a RAF Jet Provost trainer aircraft
similar to the one pictured above.
|
|
Here she is
'Val the Viper', there are a few things that need to
be rectified before use, for example over tightened unions
and cross threaded bolts. |
|
|
|
Turbine
wheel view. All the blades seem to be in excellent
condition.
|
|
Another view of the rear end, this time with a better
view of the exhaust cone/ spike. |
|
|
|
Oil tank on the left hand side, oil pump on the front
bottom with some fuel controls on the top.
|
|
Tacho Genny,
Gearbox and fuel pump on the front right and the fuel
filter assembly can be seen low down to the right.
|
|
|
|
A basic
failure containment shield around the turbine wheel.
|
|
Oil tank on the left, fuel control
valves on top. |
|
|
|
A close view of the Tacho Genny, Gearbox and fuel pump.
|
|
Fuel filter housing.
|
|
|
|
| |
|
Oil pump assembly.
|
|
|
|
Fuel control valve, the HP Cock and the Throttle can
be seen clearly to the right of the unit.
|
|
All the wiring (apart from the igniter
box) terminate at this multi pole connector.
|
